Faucet Installation in Edmonton

If your faucet isn’t working properly, you will have no access to water in any of your fixtures, a significant part of our daily life and a vital resource for your home or business. A faucet that fails to control or regulate water properly has to be repaired or replaced by a reliable, fully experienced journeyman plumber. At mechanical masters Inc we have been providing plumbing services in Edmonton and surrounding areas.And you went out and bought a new faucet at mechanical masters Inc our certified journey plumbers will have the faucet installed and backed by our 2 year labor warranty if we provide the faucet will back the faucet warranty for 2 years

A faucet is one of the most used fixtures and is bound to fail at so point in its life span and each day we see lots malfunctions; the most common issues include:

  • Leaky faucet
  • Not enough water coming out
  • Leaky pull down or pull out sprayer
  • Poor water flow
  • Unusual sound when a faucet is on
  • Non-operable knobs

The Vast majority of these complications are due to ordinary wear and tear of the faucet that has reached the end of its useful life. Notwithstanding, some can be a direct result of a manufacturer’s imperfection or poor installation.

Faucet Repair in Edmonton

While you might want to fix your taps or faucet by yourself, or imagine it could be less expensive to DIY, that isn’t generally the case. Our journeyman plumbers are capable and experienced. We will not second guess when we come to repair your faucet—what may appear to be a small issue, can turn into a disastrous occasion if the repair is unsuccessful. Take for instance a leaking spigot; if you endeavor to fix it yourself and the fix isn’t done accurately, you are discarding away money. It is assessed that a faucet that’s dripping at moderate rate overtime can squander up to $20 worth of water a month.

At the point to your home, we will:

  • Listen to your concerns
  • Visually Inspect the faucet
  • Exercise the faucet Parts
  • Provide a quote with upfront pricing

Faucet Replacement in Edmonton

After presenting you with a quote and several different alternatives for either repair or replacement, we will start the work. On a leaking faucet, a noisy faucet or a faucet that has non-working handles, replacing washers, nuts and seals can commonly fix the issue. Poor water stream from the faucet head is generally tackled by cleaning or replacing the aerator. A vegetable sprayer that isn’t working, on the other hand, commonly needs a diverter change or cleaning.

Your faucet has a usable existence of 10 to 15 years. If your faucet is older than 10 years, we may recommend a total substitution to a modern style of replacement. Faucets available today have a few incredible features including touch sensitive models, attached pullout or pull down sprayer models and more. If you are keen on a total faucet replacement, our plumbers will be glad to help you.

Try Not to Trust Anyone Else
Mechanical Masters Inc has consistently ensured that our clients are treated with deference and we will bend over backward to be here when you need us.

Faucets have to be installed by a reliable, fully experienced journeyman plumber. At mechanical masters Inc we have been providing plumbing services in Edmonton and surrounding areas

Give us a call or Schedule an appointment

Residential & Commercial Drain Cleaning

Drain cleaning and unclogging is what Mechanical Masters Inc does. We unclog drains in the kitchen, bathroom, basement, and other areas of your home or building. Our technicians can perform fast and effective drain cleaning, including camera inspections and high-pressure water jetting for sewer lines.

Mechanical or power cleaning is the best way to remove blocked points from a drain. The environmental effects of chemical drain cleaners can be avoided with this method as well as hazardous Chemicals to Plumbing fixtures drains and the end user, the power method should remove any blockage.

Preventive maintenance is the key to keeping the drain pipes clear. The homeowner or landlord  should discharge hot water down the drain on a periodic basis and should avoid pouring grease into the drain. Strainers should be used on fixture Outlets to trap solids from flowing into the drain.

Give us a call or Schedule an appointment

Pipe Inspection

When a sewer line creates continuous  blockage problems,  line inspection may be necessary to determine the actual cause of blockage this inspection will determine the necessary sewer or drain maintenance procedure that may be warranted to prevent excessive blockages in the future

24-hour Emergency Drain Cleaning

For all of your drain problems, Mechanical masters Inc provides 24-hour emergency service. We know clogs can happen when you least expect them. With around-the-clock emergency service, we can have your sink, bathtub, washer, toilet, or floor drain unclogged as soon as possible. If you have an after-hours emergency.

Give us a call or Schedule an appointment

Plumbing Installations/Repairs/Maintenance

Mechanical Masters inc plumbing and heating and gas fitting provides both residential and commercial plumbing repairs in Edmonton And surrounding areas

Most people all there know about the plumbing in their home or business is that when their turn on the faucet water appears, and down the drain the water goes. What happens behind walls that allows that to happen.

Let’s talk from the being, The water source from the water supplier. Water enters the property through a water main from the street into your basement where the water main shut off valve is located and water meter  it’s a good idea to learn where the main shut off valve for your home is located in case of an emergency.

The water drains out of your house through well constructed structures with a pretty complicated system of rigid plastic drain pipes. It all starts with the main stuck 3-4 inches (ca. 10 cm) in diameter, and travel from the main sewer line all the way through your house or business  and vented out the roof this vent allows methane gas to escape and it provides much-needed air so all your drains follow freely.

Drain lines for all the fixtures in your home or business follow through horizontal drain pipes and into this main stack and each fixture is vented through it too. In order for various drains to flow in the main stack water needs to gently flow down hill.

Codes may vary in size; these horizontal drain pipes typically need to slow down at least a quarter of an inch per foot of travel in other words a branch drain travelling 4 feet (1.22 m) to the main stack needs to slope downward a full inch.

Generally speaking a drain system  that flows slowly smoothie and makes sweeping terms rather than sharp ones is at best, but in case there is a clog there a cleanouts located throughout the system easily accessible places so a professional can snake the system

Give us a call or Schedule an appointment

How do I Protect my Home from flooding?

Most of us have heard of a friend or on the news, or experienced a basement flood. You know how devastating and expensive it can be. Managing the aftermath of a flood can be emotionally, physically and financially exhausting. Luckily, today’s plumbing technology has given us how to safeguard our homes from floods before they even occur.

Installation of a Sewer Mainline Backwater Valve in your Home or Property

A mainline backwater valve installation is the best answer to shield your Property or home from sewer backups and floods. Operating as a reverse preventer, a sewer backwater valve is a tiny device about the scale of a backpack. This tiny, nonetheless outstanding device stops the reverse flow of water into your home, keeping your basement dry and your home free from damage.

When it’s in place, your sewer backwater valve installation gives you complete genuine peace of mind knowing that any sort of reverse flow of sewage and greywater will be blocked into your basement. It’s important that the reverse flow of sewage and greywater be halted quickly because once it begins to enter your home or property, the harm is now done and it’s past the point where it is possible to turn around.

Backwater Valve: How it Works

Your property or home’s drainage system allows gray water and sewage to drain out of the property or home. A backwater valve will halt reverse flow of gray water or sewage from reverse flow into your property or home should the building sewer main become overloaded. At the most, you can access the backwater valve by opening the access cover. You can verify by looking through the clear cover on the backwater valve access box.

In the back water valve there is a swing flap that is regularly open permitting sewer gases to be vented as well as sewage and greywater to leave your property or home. There is a swing flap in the event of reverse flow of sewage or grey water in the municipal drainage system into your property or home. The flap will start to lift at the same rate as the reverse flow and shut tight in this manner keeping anything from entering your property or home.

When the municipal drainage system clears, the flap will fall into the open position due to gravity, thus permitting water and sewage to continue streaming out of your property or home.

In the event that this backwater valve is being put in a current home, rather than in new construction, obtain a plumbing permit from your municipality as needed.

Backwater Valve Installations in Basement by a Licensed plumber

Suppose you live in a flood inclined zone. Or perhaps your zone is known to get substantial rainfalls at least once a year. It’s worthwhile to invest in a backwater valve for your home. In regard to floods, it’s worth taking the matter in your own hands and protecting your property or home.

Backwater valves are required by the plumbing and building code, municipalities have adopted the code, it’s also recommended by insurance companies. It’s much cheaper when installed in new construction, in retrofit applications, its labor and time-consuming work. Municipalities require a plumbing permit and inspection. You need to hire a licensed and experienced Plumber to do the job. At Mechanical Masters Inc, we handle the permit acquisition, book an appropriate time with you and perform the backwater valve installation right away. Once the installation is complete, we arrange for a municipal inspection. In some municipalities there are subsidies available, check this link with Epcor.

Take a look at this well put together video by the Insurance Bureau of Canada on how a backwater valve is installed, and how it works.

How Backwater Valves are Installed

Once the quote is approved, Mechanical Masters Inc books you in for the backwater valve installation.

  • We break the concrete floor in your basement. (In order to avoid harm and guarantee good and correct work, this should be done by a certified skilled plumber.
  • A section of your sewer line is cut out and replaced, With the backwater valve.
  • Now that the backwater valve is in place your property or home is protected against future sewage or greywater flooding.

Mainline Backwater Valve Maintenance is Important

Installation of the Mainline backwater valve is the most important aspect of sewage and grey water flood protection, without proper maintenance. Over a period of time the backwater valve will leak due to cracks to the flap. If the flapper does crack, it should be repaired right away. The mainline backwater valve has a clear see through top cover and a removable cleanout cover, which makes it convenient for inspection by a qualified plumber. At Mechanical Masters Inc can contact this sort of inspection for you, and it’s covered in out plumbing deluxe maintenance plan give us a Call today

A Backwater Valve Installation is one of Two ways to Protect Your Home from Future Flooding Consider A Sump Pump

Give us a call or Schedule an appointment

Water Filtration

At mechanical Masters we do understand that everyone is looking for new ways to improve their health. Like increasing their safe water intake.

our technicians a trained and certified in water filtration and  backflow prevention

A safe and reliable supply of water is required to maintain life; some water supplies contain minerals that make the available water less than desirable.

Water is a very interesting and amazing substance that can be found in solid liquid and gaseous State and is considered the best Solvent known to man.

Water hardness

Water hardness (calcium and magnesium salts) is the most common impurity in water most home supplies range from 3 to 25 grains per gallon hardness.
Total hardness is measured in grains per gallon or milligrams per liter and it gets how much mineral deposit has dissolved in the water

Disadvantages  of hard water
Scale buildup In pipes
Hot water tank failure
Scale buildup in water kettles
scale on Bath sink and Kitchen faucets
Use of more detergent washing machines
And many more

Water Filtration

A lot of people are concerned about how I filter my water. Many people at least 90% of Canadian households get their water out of the public water supply, Which is perfectly safe. but people a still worried, their go out to get cases of this bottle water and there’s no guarantee that this is any better because this is out of a tap and gets filter to find a level of safety

If you are unsure where to begin with the water filtering system you could start with the simplest form of basic types of water filters,

  • point of use
  • under the counter
  • whole house filtration system
Advantage water filtration systems
Better taste And smell
The removal of chlorine and bacterial contaminants
Better for cooking, bathing and many more

Give us a call or Schedule an appointment

BackFlow Preventer

At mechanical Masters we do understand the need to establish a cross connection control program.  Our technicians at mechanical Masters are certified by the American Water Works Association (AWWA) and hold a  certification to install and to recertify backflow preventers which also require an annual inspection for recertification, this is important to help eliminate the  potential cause of cross-connection(Backflow prevention) which has led to major epidemics and minor illnesses and even death.

Backflow preventer (cross connection) what is backflow prevention and what does it do to our portable water supply. essentially is there to protect our drinking Supply water. once water goes through the backflow preventer the city’s concern is that it doesn’t return.

Backflow Prevention Hazardous Classification

Any type of cross connection which involves water that might have been heated or cooled that cannot create danger to healthAny type of minor hazard connection which may have a low probability of becoming a severe hazardCross connection of water and water that contains additives or substances and a witch concentration is a danger to health

Give us a call or Schedule an appointment

Tankless Installation/Repair/Maintenance

Tankless water heaters are manufactured to supply endless hot water within the right parameters, And have a high Energy Efficiency rating compared to the regular storage hot water heaters or tanks.

Tankless water heater has a heating coil suspended over a gas burner with all necessary automatic controls when the hot water faucet is open and the water flows through the heating coil the gas burner is ignited by Water flow sensor and the water passing through the heat coil is heated

Give us a call or Schedule an appointment

The advantage of this method of heating domestic hot water is that it provides constant hot water supply and because there is no storage tank there is no heat lost during Idle periodsLarge input of heat causes some precipitation of the material in the water and frequent maintenance is required if poor water is used.
The lifespan for tankless water heaters is over 20 years if well maintainedThe initial installation labour cost and the Price of the tankless water heater
The energy efficient compared to regular storage tankTankless water heaters cannot be neglected when it comes to maintenance
Municipal Water having minerals in the water precipitation occurs in tankless water heaters requiring them to be flushed annually

The advantage of this method of heating domestic hot water is that it provides constant hot water supply and because there is no storage tank there is no heat lost during Idle periods

There are so many manufacturers of tankless water heaters on the market Some of these tankless water heaters are manufactured to act as boilers providing space heating for the entire house or home.

If you are considering or it’s time to place your tank storage hot water heater And thinking of replacing it with a tankless water heater. these tankless water heaters have advantages and disadvantages and you need consultation to see if a tankless is right for your application or budget.

At mechanical Masters out  journeyman technicians a trained, and certified with over15 years of experience to install repair and maintain any kind of tankless water heater

If you’re not sure what kind of application works best for you, feel free to give us a call so you could get a no obligation consultation or quote.

Give us a call or Schedule an appointment

Tankless Repair/Maintenance

At mechanical Masters Our journeyman technicians are trained to repair tankless water heaters so you can be rest assured that your tankless heater will be repaired to the manufacturers specifications.

We at Mechanical Masters recommend that customers or homeowners should not attempt to repair any tankless water heater. because of its small compact footprint. A tankless water heater has a lot of mechanical and electrical components Within them, if any mistake is done It could cost a few extra hundred dollars.

Maintenance is the key to a Smooth running tankless water heater

Give us a call or Schedule an appointment

Hot Water Tank Installation/Repair/Maintenance

Hot water Tank Installation/Repair/maintenance, most customers start looking for a new hot water heater, for the following reasons, no hot water or lukewarm water or spotted leaking around the hot water tank base or bottom, plumbers at mechanical Masters inc have the adequate training to diagnose and recommend the right cause of action

When selecting a new or replacement Hot water heater for your home or Business, you need to consider all plumbing installations, require an adequate supply of hot water. weather it’s a new install or replacement in a residential single family or commercial building, there should be adequate and sufficient hot at all fixtures requiring hot water.

Residential Water Heaters

The production of hot water for residential use is generally achieved by one of the following three methods

  • electricity provides energy to one or more elements immersed into the water with in the storage tank
  • Gas heats the water either in a large storage vessel over there in a small coil (instantaneous water heater)
  • Hot fluid from an external heat source heats water in a large storage tank with the aid of a heat transfer coil (indirect water heater)

The terms hot water heater and hot water tank are frequently used to refer to the same type of hot water heating device; Most domestic hot water heaters are storage type water heaters that incorporate a heating component and a storage tank component and are therefore covered by either terminology. On larger Commercial and Industrial applications, the two components may be separated and referred to as hot water heating component and hot water storage component

Commercial Hot Water Tanks

Commercial hot water tanks come in a variety of sizes usually very much heavier capacities than residential ones; sizes generally range from 50 gallons to 62 gallons with high capacity and fast recovery. for very large buildings such as high rises and large Office Buildings the hot water tanks incorporate a boiler with a large vertical or horizontal storage tanks these large capacity storage tanks are usually made of heavy gauge and coated Steel but some may be galvanized old line with Portland cement small tanks made of glass lined Steel

At Mechanical masters inc. We have qualified, highly reliable Alberta trained journeyman Plumbers for our customers. So book an appointment today,or give us a call and will recommend the right cause of action!

Hot Water Tank Repair/Maintenance

Maintenance of your hot water heater or Tank is very important, the following maintenance and repair  procedures Outlined in the manufacturers installation manual and should be performed by a qualified technician.

At mechanical Masters Inc we are trained to handle Maintenance & Repair issues  should there occur

Give us a call or Schedule an appointment

Toilet Repair

Home owners, property owners or business owners in Edmonton and surrounding areas you may already comprehend the significance of good working plumbing. Any Plumbing issue can ruin your day especially when it comes to a non working toilet. In this instance you should reach out to your local plumber or plumbing company you trust for your regular maintenance.

Regardless of when the problem happens, let it be flushing, refilling or not being used. For a qualified plumber in Edmonton and surrounding areas, call Mechanical Masters Inc! Mechanical masters Inc is your go to place for plumbing repairs, replacements and installations. A non functioning or clogged toilet shouldn’t ruin your day. At Mechanical masters Inc we service the Edmonton and surrounding areas.

Give us a call or Schedule an appointment

Toilet Installation

When it comes to Water Closet (toilet) installation, At Mechanical masters Inc our certified journey plumbers have years of experience. The usual procedure of replacement is to examine the existing toilet, water supply lines and shut off valves for any deterioration and will proceed and remove the toilet and will inspect the toilet flange for any cracks, if any will recommend the right course of action.
If it’s a new installation will schedule a site or home visit to determine, all plumbing drains and water lines are accessible if so will provide a flat rate price to get the toilet installed

Some homeowners go on YouTube and watch videos and try to install their own toilet to save themselves may $150-350 not knowing that if the installation goes south there could be serious ramifications like flooded house or health hazards. We at Mechanical masters Inc recommend a certified journey plumber do the job correctly the first time. Our trucks have all the repair parts to almost any toilet. All the work we do is protected by a2 year labor and parts warrant, so you can rest assured that your plumbing situation will be well looked after

A plumbing Emergency

Many homeowners, property owners think a toilet is a simple fixture; it’s quite more complex than it looks. Your toilet is made up of a variety of moving parts all working together. It is not advised to attempt to fix your toilet issues with no experience. That last thing you need to do during a crisis is to fuel the problem. In case of a plumbing emergency is to shut off the wall water supply valve. In the event you can’t shut off the water supply valve to the toilet there is a main house shutoff valve in the basement or crawl space. Once you have the water isolated you need to call Mechanical masters Inc as soon as possible!

If your toilet is showing signs of a problem call Mechanical masters Inc in Edmonton and surrounding areas today!

Give us a call or Schedule an appointment

Do You Have Suspect for a Leak? We Can Help!

A leak in your plumbing pipes framework can stress you out and not only that can likewise damage your home or organizations structure. Here at Mechanical masters Inc, we have years of plumbing experience and we have seen numerous plumbing leaks and pipe breaks. Plumbing pipe leaks are frequently brought about by maturing pipes yet can likewise be because of poor installation, tree root invasion, and the utilization of burning cleaning synthetic chemicals.

There are few signs to look for when determining whether you have a leak present in your plumbing pipes let be water distribution or drainage pipes:

  • Soft ground
  • Water spots
  • Unexplained floor puddles
  • Wet floors
  • Wet walls or bubble wall paint
  • Visible water dripping
  • Puddles in the yard
  • Water pinhole spray

How to Locate Leaks?

Leaks can be hard to find because of the size leaks can be as small as a pinpoint, but when under pressure, those pinhole leaks can still lead to huge damage. In years past, plumbers just had one method of determining the location of leaks in piping that was concealed by walls, foundations and landscaping, cutting and digging through the obstruction and visually inspecting the pipes. With advances in technology, Mechanical Masters Inc is now able to hear behind walls and foundations without cutting walls or excavation.

At the point we get to your home or business, we will:

  • Evaluate the area where the indications of the leak are present
  • Insert a camera into the pipes
  • Use video equipment to travel through the pipes
  • Inspect the inside pipe walls to locate the leak
  • Present a detailed quote with upfront pricing

Leak detection ensures protection and integrity of your property while locating the leak rapidly and proficiently.

How Do We Repair Leaks?

When we use the video or sound inspection equipment, we can pinpoint the specific area of your leak. After finding the location of the leak, we will just have to cut into walls, floors, in the area of the leak. For small leaks, we are usually able to replace a section of damaged piping. In pipes that have enormous large leaks or excessive damage, an entire home pipe replacement may be required.

Emergency Crisis Response

Leaks can happen at any time. Luckily, we are here 6 days a week and emergency 24 hour service. Do not allow leaks to do extensive damage to your home!
Plumbing repairs have to be installed by a reliable, fully experienced journeyman plumber. At mechanical masters inc we have been providing plumbing services in Edmonton and surrounding areas.

Give us a call or Schedule an appointment

Keeping Your Kitchen Clean & Sanitary

A garbage disposal or waste disposal is a fixture that numerous families can’t envision living without. In the event that you don’t have a garbage disposal or if your present waste disposal isn’t working properly, you need to call a certified journeyman plumber.

Here at Mechanical Masters Inc, we have seen an assortment of garbage disposal issues including:

  • Stuck garbage disposals
  • Humming garbage disposal
  • Obstructed garbage disposal
  • No power
  • Leaking
  • boisterous
  • Shaking or squirming

The greater part of these garbage disposal issues are a result of putting things down the garbage disposal that cause harm. In any case, leaks, noise, and movement can be due to poor installation.

How Are Garbage Disposals Diagnosed?

With a lot years of experience behind us, we can analyze and diagnose your garbage disposal using our training. Our journeyman plumbers in Edmonton and surrounding areas are specialists on the appliances they work on and will ensure that the issues you are having are attended right the first time.

The following are some of the services we perform when we respond to your call:

  • Test and check your garbage disposal
  • Check all plumbing and electrical connections
  • Visually Inspect the garbage disposal
  • Check if the reset button was tripped
  • Check if garbage disposal is jammed in the grinder plates

If a foreign object, is stuck in the grinder. It will cause the garbage disposal to Jam and hum. We will utilize our tools to physically move the grinder plates to free the object and check to make ensure the reset button is engaged. If the garbage disposal is Leaking and loose it may require a new mounting kit that holds the disposal into place. If your garbage disposal is getting power and it hasn’t tripped, it may be time for a new disposal.

What Are The Benefits Of a Garbage Disposal?

Garbage disposals help keep your food waste from rotting in the garbage trash. Garbage disposal will grind your waste up and flush them down the drain out to your sewer system. A garbage disposal can lessen your garbage yield, make dinner or lunch cleanup simple and help keep your home clean.

Plumbing fixtures have to be installed by a reliable, fully experienced journeyman plumber. At mechanical masters Inc we have been providing plumbing services in Edmonton and surrounding areas

Give us a call or Schedule an appointment

Tub Replacement

Remodeling can involve a few changes like replacing a bathtub with a shower which is at the top of numerous homeowners and property holders’ remodeling lists. And for a great reason. Far less homes today come with tub-only bathrooms, which were resulting in lower resale values. The world is revolving when it comes to retirement, more property owners or homeowners living in their homes lot longer, in return making bathrooms much nicer and livable.

Removing bathtubs and replacing them with showers are some of our most popular bathroom renovations While this is a mind boggling task that can take upwards of three days to seven days to finish, a tub-to-shower change is one that pays itself off after the dust has settled.

Replacing a Tub with a Shower?

Replacing a bathtub with a shower can go in either of two ways: upscale with a showerhead or complete makeover.

Upscale: Adding a Showerhead

Up scaling applies to bathtubs that have only tub faucets and no showerhead and controls. The original bathtub isn’t replaced with a shower base or its three walls. The wall where the faucet is located will be upscale. By adding a new faucet with capabilities of a showerhead or rain head whichever the customer chooses.

With new technology always on the rise, bathtub controls have evolved. An old faucet will be replaced with a new faucet. All new plumbing water lines will be installed. It could be copper or pex piping based on the quote copper being more expensive than plastic pex tubing. With all plumbing done and connected and leak free, the wall will be tiled or the acrylic surround is replaced.

At this point shower door or a tub shower curtain can be installed. The bathtub now can function as both a bathtub and a shower.

Upscale: complete tub shower replacement

Totally replacing the bathtub means removing everything in that space tub, walls, even the ceiling and flooring and installing a bathtub, tub controls and faucet, walls, and door.

Total replacement address on many aspects of bathroom remodeling: demolition, plumbing, flooring, drywall, insulation, and general carpentry. Yet one component makes the project easier: a prefabricated bathtub kit.
Accessible in stock or by custom order at most home centers, this kit provides you with a tub, matching integral wall. Preassembled bathtub kits save considerable time and flatten the learning curve by getting rid of the tricky sub-project of tiling on vertical surfaces.

For diy taking on this project, a premade shower installation is a bit quicker and less hard than if you were to make a shower pan from scratch on a wet mortar bed, plus tiling the walls.

In the old days, a bathroom resembled more like a business or transactional place. It was a place where you would go in and handle your thing and get out quickly. But as it may be, today’s washroom is a sanctuary. If you’re single or a family with kids demanding your attention, the last place you can hide is in the washroom. The washroom is the single place you can remain in peace for hours. For you to stay in the washroom peacefully, it has to be elegant. In the washroom elegant renovation world, it includes installing steam showers, saunas, jetted bathtubs with more than one showerhead, and other high-class spa features. But as this may be, it’s costly. Individuals in reality can’t afford these luxuries. Fortunately, mechanical masters inc we offer some tips for adding elegant features to your washroom without spending a fortune remodeling.

Towel Warmer

If you wake up in the morning before but your programmable thermostat kicks in the heat in the washroom, getting out of the shower might be a chilly encounter. This can be even terrible if you have a big washroom. But as this may be, a towel warmer is the fabulous way to ensure you step out of the shower and have a fantastic warm encounter. Purchasing a towel warmer is a great way of adding luxury to your washroom without spending a large amount of money remodeling. Costs are below $300 for straightforward electric models that hang on the wall. This is reasonable for many homeowners.

Bathtub and shower have to be installed by a reliable, fully experienced journeyman plumber. At mechanical masters Inc we have been providing plumbing services in Edmonton and surrounding areas

Give us a call or Schedule an appointment

Water Pressure

Many homeowners, property owners think when it comes to low water pressure, hot or cold, maybe it’s time to change the hot water tank or main water valve is shut off. Let’s start asking around maybe ask your neighbor or contact your water supplierhas experienced similar issues, chances are your low water pressure isn’t connected to your house
If it turns out the issue is in your house it is not advised to attempt to fix your low water issues with no experience. That last thing you need to do during a crisis is to fuel the problem.

The average water pressure in a residential setting is about 40 to 60 pounds per square inch if you are dealing with low water pressure chances are the pressure is way low than that

What’s the cause of low water pressure?

  • Closed valves
  • Clogged pipes
  • Faulty fixture
  • Pressure regulator

At mechanical Masters Inc, our certified journeyman technicians. we investigate the issue of low water pressure in your home with great detail, the first thing to note is what’s the scope of the problem Will examine all the fixtures in the house to make sure they’re not related and isolate each fixture to narrow down the cause either hot or cold low water pressure

Give us a call or Schedule an appointment

Sink Replacement

A nice new sink can change the whole and functionality of your kitchen, powder room or bathroom there are all styles of sinks:
Types of sinks

  • Drop -in
  • Undermount
  • Pedestal
  • Vessel
  • Farm house


As the name goes drop-in, the sink is installed in the hole cut in the countertop with a rim on the outside edges this sink is referred to as a self-rimming or drop-in style of sink and sits on top of the countertop surface.
These installations are common on laminate countertop. With a stainless steel sink.


Undermount sinks are mounted under a countertop, so they seem to hang underneath the counter. Undermounts that are porcelain or ceramic have some substantial weight to them and should be installed on a stone, solid counter or a strong cupboard base no overlay counters or MDF cupboards for this style. Installing undermounts is challenging the plumber should appropriately seal the edges to prevent plumbing leaks or fall of the undermount.

Pedestal sink

This sink is referred to as a freestanding or standalone sink, it typically comes in one or two piece configurations made of porcelain or ceramic. They are basic types of sinks and will not have issues with wood decay or harm like you would discover with a cabinet style vanities


Recollect the first occasion when you saw a vessel sink? It might have been while watching a home show, visiting a companion’s home, or going to an open house. You may have felt disarray, wonderment, or pleasure. It looks like a big bowl sitting on the cabinet and vessel sinks are popular in high end bathrooms. They come in different materials to name a few copper, stone or ceramic

Farmhouse or apron

The apron-front, or farmhouse, sink is a popular fixture for kitchens as of now, and with the rise in popularity of kitchens that mix traditional and modern vintage look, with a wide front it feels more proper than ever. They are big and heavy and require specialized cabinets.

Sinks have to be installed by a reliable, fully experienced journeyman plumber. At mechanical masters inc we have been providing plumbing services in Edmonton and surrounding areas

Give us a call or Schedule an appointment


Our Customer Stories

Request Service Today!

If you have a question, need emergency help or need to make an appointment, fill out the service request form

Our lead journeyman here at Mechanical Masters inc will call you back as soon as possible.